|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 AWG: High Strength Solid CC Steel
|
RFS Cellflex cables are ideal for applications that require the lowest loss and are great for use on repeaters and critical communication systems for emergency management agencies and other commercial applications.
|
RG-213: 13 AWG (7x.0296") Tinned Copper: Dielectric Layer .098" Solid Polyethylene: Shield Type, Tinned Copper Braid: Jacket, White PVC Type IIA (Non-contaminating)
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
The LMR-400 is a low loss braided coaxial cable. The 50 Ohm coax cable has a stranded outer conductor and a bare copper center conductor. It is 100 percent foil and 88 percent coverage braided shield prevents loss
|
Bury-FLEX TM A Davis RF 50 ohm, 100% double shield, flexible design. Direct-burial PE (not PVC) jacket, stranded conductor, low loss - 2.9 dB/100 ft @ 400MHz 50 OHM
|
This LMR-195 UF coax cable can be used in almost any application where handling characteristics, improved shield and low loss is required.
|
Times Microwave LMR-400UF UltraFlex coaxial cable is designed for mobile antenna applications. The 3/8 inch, 50 Ohm coax cable has a stranded outer conductor and a stranded bare copper center conductor. 100 percent foil and 88 percent coverage braid shield reduces loss
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
125FT - 13 AWG stranded (7x21) .089" bare copper conductor, polyethylene Insulation, bare copper braid shield (96% coverage), non-contaminating PVC jacket.
|
This LMR-195 coax cable can be used in almost any application where handling characteristics, improved shield and low loss is required.
|
50 FT. 26 AWG, Black PE - Polyethylene Coat highly UV & abrasion resistant. Often referred to as "Kite Wire". Break Strength 25 lbs. 19 strands of copper clad Steel Wire. Weighs.38 lbs per 1000 FT.
|
Bare Annealed Copper 12 AWG - 259 Strands
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Bare Tinned Annealed Copper 12 AWG - 259 Strands
|
The LMR-600UF 1/2 inch Ultra flex cable is super flexible due to its stranded center conductor. It has a tinned copper outer conductor that is taped and has a UV-resistant polyethylene jacket for outdoor use.
|
This LMR-195 coax cable can be used in almost any application where handling characteristics, improved shield and low loss is required.
|
RG-59A/U - 75 OHM Stranded Tinned Copper Military C-17 - Dielectric Layer .098" Solid Polyethylene - Shield Type Tinned Copper Braid - Jacket White PVC Type IIA (Non-contaminated)
|
|