Home > Jumper Assemblies
We found 105 results matching your criteria.
Select a Sub Category:
Amphenol Jumper Assemblies Bury-Flex Jumper Assembly
Davis RG-58CU Jumper Assembly RG400 Jumper Assemblies
DxHRS Talkie Assemblies LMR-240 Jumper Assembly
LMR-240UF Jumper Assembly LMR-400 Jumper Assembly
LMR-400UF Jumper Assembly Davis RF RG-213 Jumper Assembly
Davis RF RG-8X Coax Jumpers

DXHRS Jumper Assemblies < 25 FT

  • Our coax assemblies are custom made when ordered and come with our " Assurance of Quality" pledge

  • We use made in the USA Davis RF coax, the same coax used by NASA, U.S. Military and trusted by Ham Radio operators and Times Microwave LMR-240 and LMR-400 to make our Jumpers

  • We use top quality silver plated brass body PL259 connectors with Teflon dielectric.

  • Our assemblies are tested for continuity, shorts to grounds and pull tested to 25 lb.

  • Each connector is sealed with our Adhesive Lined Heat Shrink Tubing for protection against the elements.

Check out our Coax Assemblies if you need a longer length.

Sort By:
Page of 6
RG-174 Jumper Assembly 36" UHF female / SMA male RG-174 Jumper Assembly 36" UHF female / SMA female DxHRS RG400 - 1.5 FT Jumper Assembly DxHRS RG400 - 2 FT Jumper Assembly
Our Price: $15.85

(1)
more info
Our Price: $15.85
more info
Our Price: $24.57
more info
Our Price: $25.24

(1)
more info
UHF female / SMA male Jumper RG-174 coaxial cable UHF female / SMA female Jumper RG-174 coaxial cable RG400 Coax RG400 Coax
UHF female / SMA male with 36 inches of RG-174 coaxial cabl. coax 50 ohms, highest quality! These strain-relief cables are designed to prevent damage to the antenna connectors of handie talkies when connecting to external antennas with stiff coax such as RG-8.Without these cables, it is likely that the stiff coax will destroy the connector on your handie talkie, causing expensive damage! Our strain relief cables are of highest quality, and use RG-174 super-flexible coax, with 50 ohms impedance.UHF female / SMA male with 36 inches of RG-174 coaxial cable. UHF female / SMA female with 36 inches of RG-174 coax 50 ohms.
highest quality! These strain-relief cables are designed to prevent damage to the antenna connectors of handie talkies when connecting to external antennas with stiff coax such as RG-8.Without these cables, it is likely that the stiff coax will destroy the connector on your handie talkie, causing expensive damage! Our strain relief cables are of highest quality, and use RG-174 super-flexible coax, with 50 ohms impedance.UHF female / SMA male with 36 inches of RG-174 coaxial cable. 		RG400 coax, Silver covered copper conductor. PTFE dielectric, Double Silver copper covered shields, FEP Type IX per MIL-C-17 jacket. Silver plated brass PL259 connector with UG176 adapter. RG400 coax, Silver covered copper conductor. PTFE dielectric, Double Silver copper covered shields, FEP Type IX per MIL-C-17 jacket. Silver plated brass PL259 connector with UG176 adapter.
DxHRS RG-58CU Coax - 1.5 FT Jumper Assembly Davis RG-8XLL - 2 FT Jumper Assembly DxHRS RG-58CU Coax - 3 FT Jumper Assembly DxHRS RG400 - 3 FT Jumper Assembly
Our Price: $25.85
more info
Our Price: $27.39
Sale Price: $26.39
Savings: $1.00
more info
Our Price: $26.46

(2)
more info
Our Price: $26.60

(2)
more info
RG58U Coax RG8X Coax RG8X Coax RG400 Coax
Davis RF RG58CU coax. Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
Davis RF - RG8X LL (low loss) 50 ohm, 16 AWG stranded BC, foam PE, foil shield, w/ TC braid black PVC (type IIA) jacket.

Excellent flexibility, great for short runs in your ham shack, very good shielding, low loss thus minimizing interference from surrounding equipment.
 		Davis RF RG58CU coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
RG400 coax, Silver covered copper conductor. PTFE dielectric, Double Silver copper covered shields, FEP Type IX per MIL-C-17 jacket. Silver plated brass PL259 connector with UG176 adapter.
Davis RG-8XLL - 3 FT Jumper Assembly DxHRS RG-58CU Coax - 6 FT Jumper Assembly DxHRS Bury-Flex - 2 FT Jumper Assembly Davis RG-8XLL - 6 FT Jumper Assembly
Our Price: $27.84
Sale Price: $26.84
Savings: $1.00

(1)
more info
Our Price: $27.68
more info
Our Price: $28.85
Sale Price: $27.85
Savings: $1.00
more info
Our Price: $29.17
Sale Price: $28.17
Savings: $1.00

(1)
more info
RG8X Coax RG8X Coax Davis RF Bury-Flex Jumper RG8X Coax
Davis RF - RG8X LL (low loss) 50 ohm, 16 AWG stranded BC, foam PE, foil shield, w/ TC braid black PVC (type IIA) jacket.

Excellent flexibility, great for short runs in your ham shack, very good shielding, low loss thus minimizing interference from surrounding equipment
 		Davis RF RG58CU coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
Davis RF Bury-FLEX TM Jumper Assembly, 100% double shield, flexible design. Direct-burial PE (not PVC) jacket, stranded conductor, low loss - 2.9 dB/100 ft @ 400MHz 50 OHM Davis RF - RG8X LL (low loss) 50 ohm, 16 AWG stranded BC, foam PE, foil shield, w/ TC braid black PVC (type IIA) jacket.

Excellent flexibility, great for short runs in your ham shack, very good shielding, low loss thus minimizing interference from surrounding equipment
DxHRS RG-213 Coax - 2 FT Jumper Assembly LMR-400 3-FT Jumper Assembly DxHRS RG-58CU Coax - 2 FT Jumper Assembly DxHRS RG-58CU Coax - 9 FT Jumper Assembly
Our Price: $29.85
Sale Price: $28.85
Savings: $1.00

(2)
more info
Our Price: $28.85

(1)
more info
Our Price: $28.85
more info
Our Price: $28.89
more info
RG-213 Coax LMR-400 Jumper Assembly RG8X Coax RG8X Coax
Made with Davis RF, RG-213 coax, PL259 Silver Plated Brass/Teflon UHF Male Connector and solder with DxHRS Silver Base Solder
 		Made with Times Microwave LMR-400 coax, Silver plated PL259 silver plated brass connector.and sealed with adhesive lined heat shrink. Davis RF RG58CU coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
Davis RF RG58CU coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
Davis RG-8XLL - 8 FT Jumper Assembly DxHRS RG-58CU Coax - 12 FT Jumper Assembly Davis RG-8XLL - 9 FT Jumper Assembly DxHRS RG-58CU Coax - 18 FT Jumper Assembly
Our Price: $30.07
Sale Price: $29.07
Savings: $1.00
more info
Our Price: $30.10
Sale Price: $29.11
Savings: $0.99
more info
Our Price: $30.51
Sale Price: $29.51
Savings: $1.00
more info
Our Price: $32.54
Sale Price: $29.54
Savings: $3.00
more info
RG8X Coax RG8X Coax RG8X Coax RG8X Coax
Davis RF - RG8X LL (low loss) 50 ohm, 16 AWG stranded BC, foam PE, foil shield, w/ TC braid black PVC (type IIA) jacket.

Excellent flexibility, great for short runs in your ham shack, very good shielding, low loss thus minimizing interference from surrounding equipment
 		Davis RF RG58 CU coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.
Davis RF - RG8X LL (low loss) 50 ohm, 16 AWG stranded BC, foam PE, foil shield, w/ TC braid black PVC (type IIA) jacket.

Excellent flexibility, great for short runs in your ham shack, very good shielding, low loss thus minimizing interference from surrounding equipment.
 		Davis RF- RG-58CU Coax with silver plated crimp body PL259 Connector and center pin soldered with Silver bearing, lead free, Rosin Core solder (96.5Sn/3.5Ag sealed with Heat shrink adhesive lined tubing.

Excellent flexibility, great for short runs, very good shielding, low loss thus minimizing interference from surrounding equipment.