Absolutely. I’d correct the remaining **1/2" reference**, the **inner conductor**, and the **attenuation figures**, and make the wording a little stronger for the 7/8" product without overloading the page.
Here is the complete replacement HTML:
RFS CELLFLEX® 7/8" Coaxial Cable – Premium Low-Loss Coax for RF Systems (Data Sheet)
RFS CELLFLEX® LCF78-50JA 7/8" coaxial cable by Radio Frequency Systems (RFS) is a premium 50 Ohm low-loss coaxial cable designed for professional RF installations, amateur radio, telecommunications, repeater systems, and commercial wireless applications. Its corrugated copper outer conductor provides excellent shielding performance, while the low attenuation makes it an excellent choice for long feedline runs where minimizing signal loss is important.
Key Features of RFS CELLFLEX 7/8" Coax Cable:
- ✅ Low-Loss Performance – Designed for efficient RF transmission over long cable runs
- ✅ Excellent Shielding – Corrugated copper outer conductor provides high shielding effectiveness
- ✅ High-Power Capability – Well suited for demanding RF transmission applications
- ✅ Outdoor Rated – Black UV-resistant polyethylene jacket for long-term outdoor installations
- ✅ Wide Frequency Range – Suitable for HF, VHF, UHF, repeater, cellular, and commercial RF systems
- ✅ RFS CELLFLEX Quality – Designed for dependable professional and commercial RF installations
Specifications:
- ✅ Size: 7/8" coaxial cable
- ✅ RFS Model: LCF78-50JA
- ✅ Impedance: 50 Ohms
- ✅ Inner Conductor: Copper tube
- ✅ Inner Conductor Diameter: 0.358" (9.1 mm)
- ✅ Dielectric: Foam polyethylene
- ✅ Outer Conductor: Corrugated copper
- ✅ Outer Conductor Diameter: 0.992" (25.2 mm)
- ✅ Jacket: Black UV-resistant polyethylene
- ✅ Overall Diameter: 1.094" (27.8 mm)
- ✅ Velocity of Propagation: 88%
- ✅ Maximum Frequency: 5 GHz
- ✅ Attenuation @ 100 MHz: 0.35 dB/100 ft
- ✅ Attenuation @ 200 MHz: 0.49 dB/100 ft
- ✅ Attenuation @ 450 MHz: 0.75 dB/100 ft
- ✅ Attenuation @ 900 MHz: 1.09 dB/100 ft
- ✅ Attenuation @ 1800 MHz: 1.59 dB/100 ft
- ✅ Minimum Bend Radius, Single Bend: 5" (120 mm)
Common Applications:
- ✅ Amateur (Ham) Radio Base Stations
- ✅ Repeater Systems
- ✅ VHF and UHF Antenna Systems
- ✅ Cellular and Commercial Wireless Systems
- ✅ Broadcast and Communications Towers
- ✅ Long Feedline Runs Requiring Very Low Signal Loss
- ✅ High-Power RF Installations
Note: RFS CELLFLEX® 7/8" coaxial cable is an excellent choice for installations where very low attenuation, high shielding effectiveness, and dependable outdoor performance are required. Due to its larger diameter and construction, proper CELLFLEX-compatible connectors should be used. For installations requiring greater flexibility or tighter routing, consider flexible coaxial cable such as LMR-400-UF or RG-213.
|
