|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RG8U - 52 ohm, , "Sold By The Foot" Just enter the total number of feet needed in the Qty Box
|
M17/111-RG303 Solid
silver-coated copper clad steel conductor with a polytetrafluoroethylene
(PTFE) dielectric, fluorinated ethylene propylene (FEP) jacket, and an
overall braid shield of 36 AWG silver-coated copper braid shield
|
This LMR-195 UF coax cable can be used in almost any application where handling characteristics, improved shield and low loss is required.
|
14 AWG, 7 Strands - Bare Hard Drawn Copper Wire
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Inner Conductor-Solid BC, Dielectric Foam- PE, Outer Conductor-Aluminum Tape, Overall Braid-Tinned Copper, Jacket- PE Black
|
Inner Conductor Stranded BC 0.056 (1.42),
Dielectric Foam Polyethylene 0.150 (3.81),
Outer Conductor Aluminum Tape 0.155 (3.94),
Overall Braid Tinned Copper 0.178 (4.52),
Jacket Black Thermoplastic Elastomer 0.240 (6.10)
|
8-wire cable, two #18 and six #22 stranded copper wires, UV resistant, PE jacket
|
8-wire cable, two #16 and six #18 stranded tinned copper wires, UV resistant, PE jacket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
450 ohm, #18 solid copper clad steel ladder line, PE jacket
|
Break Strength 2600 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
200FT - RG-8U - 10 AWG solid .108" bare copper conductor, semi-solid polyethylene insulation, Duobond II® + tinned copper braid shield (90% coverage), PVC jacket.
|
3/4" Tinned Grounding Braid - 20 FT
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
250 FT. 18 AWG, Black PE - Polyethylene Coat highly UV & abrasion resistant.Break Strength 117 lbs. 19 strands of copper clad Steel Wire. Weighs 6.2 lbs per 1000 FT.
|
(4) Pack Amphenol PL-259 Connector Kit. Included are (4) 2 in. Pieces of our 1/2" Adhesive Heat Shrink Tubing (3:1 Shrink ratio) at no additional cost. Cable Type: RG-8, RG-10, RG-213, RG-225 - Shell: Brass plated with Nickel, Body: Brass plated with Silver. Contact pin: Silver plated.
|
The LMR-600UF 1/2 inch Ultra flex cable is super flexible due to its stranded center conductor. It has a tinned copper outer conductor that is taped and has a UV-resistant polyethylene jacket for outdoor use. 
|
Nickel (UHF) & Gold (SMA) Plated Brass Body, Nickel (UHF) & Gold
(SMA) Plated Brass Center Pin, Delrin (UHF) & PTFE (SMA)
Dielectric, “D/TN/GN/G”
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
14 AWG, 7 Strands - Bare Hard Drawn Copper Wire
|
250 FT. 26 AWG, Black PE - Polyethylene Coat highly UV & abrasion resistant. Often referred to as "Kite Wire". Break Strength 25 lbs. 19 strands of copper clad Steel Wire. Weighs.38 lbs per 1000 FT.
|
14 AWG, 7 Strands - Bare Copper Clad Steel Wire:
|
RG-8XIIA, 50 ohm, 19 stranded #16 conductor, 95% braid, 78% VP, PVC IIA, non-contaminating Jacket
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
RG-213: 13 AWG (7x.0296") Tinned Copper: Dielectric Layer .098" Solid Polyethylene: Shield Type, Tinned Copper Braid: Jacket, White PVC Type IIA (Non-contaminating)
|
Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
RF-9913, 50 ohms, PVC-I 0.405" Jacket, Air Dielectric spiral wrapped PE, #9.5 Conductor, 88% braid plus 100% foil Shield, 84% Velocity of Propagation, and a Capacitance of 24.0 pf/ft.
|
Break Strength 2600 Lbs. Double braided, polyester (AKA Dacron). UV, mildew, rot and stretch resistant low coefficient of friction & high resistance to abrasion.
|
|
|
